Documentation & Brochures
Brochure
Our Rogers Pro Sport ‘Anti Sag Assisted’ Ballstop System (designed to reduce netting and line wire sag) is certified by a Structural Engineer to comply with the requirements of the (Northern Ireland) Building Regulations 2000 and subsequent amendments there to, regarding the calculation of structural steel, concrete foundations and specific wind loadings.
Our unique net solutions that can be installed up to 20.0 m high are designed without any front or back line wires protruding onto the pitch or run off area. If you are a GAA football or hurling club in Ireland that needs a high quality solution to be installed higher than the standard 12.0m then give our sales team a call.
Specifications & Installation
Pro-Sport 35m wide Free Standing ‘ Anti-Sag assisted’ Ball stop System,
(Must be certified by a Structural Engineer to comply with the requirements of the
(Northern Ireland)Building Regulations 2000 and subsequent amendments thereto,
regarding the calculation of structural steel, concrete foundations and specific wind
loadings).
Reference: RFS/SABS/000/00
Height: Netting to be a minimum of 14.0m high from G.L (Upper Frame work may exceed 15.5m)
Netting: 3mm braided Polytit netting 80x80mm. Tested to a strength of 200Kg. Netting to be
treated with specialized U.V. treatment in twine manufacture. Netting to cover entire free
stand area of 35,000mm. Netting to be held in position under high wind conditions using
6mm and 13mm multi strand Wire Rope. All Wires to be high Tensile Galvanised Wire, and
Clear PVC Coated.
Ballstop Netting to finish flush with top of 1200mm high Pro-Sport Spectator Surround.
Ballstop System must be ‘Free Standing’ with no line wire Supports Front or Back of
posts into playing area. All line wire supports must run horizontally along fence line to
eliminate Pitch Hazard areas.
Galvanised: Finish Galvanized to BS EN ISO 1461:1999 by an approved RFS applicator.
Posts: 273mm dia SHS Posts set in concrete bases 5000x1500x1500mm deep completely filled
with 35N concrete. Posts to be diagonally strained, using 19mm multicore / multistrand wire
rope, into independent concrete foundation 3000x1500x1500mm deep completed filled
with 35N concrete. All welding / Fabricating to take place prior to Hot Dip Galvanising. No
welding / Fabricating to take place on site or other after Galvanising has taken place to
eliminate corrosion. All jointing methods to confirm to structural Engineers requirements.
Line Wire Support: 2 no. top line wire supports to be 100x50mm x 6000mm wide barrier style supports, to
help reduce line wire and netting sag.
Conformity: Approved Contractor must submit the manufactures calculations for wind loading specific to
this project, which has been prepared by a certified structural engineer. This specification is a
minimum requirement for this project.
Fixings: 19mm Wire Rope supports to be fixed using 2” closed body rigging screw. 13mm Multi
Strand Netting line wires to be securely fastened and tightened using barrel strainers.
Netting to be fixed to multi-core/multi-strand line wire using 11mm Carbine clips and
heavy duty Plastic ties. Netting to be securely tied to bottom line wire running through
Pro Sport link attachments to top of Fencing Post.
Installation: Set out and erect fencing in straight lines or smoothly flowing curves as shown on
drawings, with tops of posts following profile of the ground, with posts set rigid, plumb
and to specified depth, or greater where necessary to ensure adequate support. With
correct fastenings and all components securely fixed.
Reviews
There are no reviews yet.